Sony DXC-C33 Instructions D'utilisation page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KNOB
You can adjust the shutter speed and video
gain with the 2 AE LEVEL control on the
front of the camera control unit. With this
setting, GAIN is locked to STEP and the 2
GAIN control does not function.
When the RM-C950 remote control unit is
connected, you can use the IRIS control on
the remote control unit to adjust the shutter
speed and video gain.
AE SETUP
Adjusts the auto exposure focusing point
and selects the AE (Auto Exposure) window
when the camera is set to AGC or CCD IRIS
mode.
Note
The setting items for AE SETUP are
displayed only when GAIN is set to AGC or
SHUTTER is set to CCD-IRIS.
AE LEVEL
Adjust the auto exposure focusing point by
turning the 2 AE LEVEL control on the
camera control unit. The set value for AE
LEVEL in the menu changes to the adjusted
level. The adjustable level is within the
range from –127 to +127. You cannot adjust
it with the menu.
AE AREA1/AE AREA2
Selects the AE window when the camera is
set to AGC or CCD IRIS mode.
When a different AE window is set to each
of AE AREA 1 and 2, you can select either
by pressing the AE AREA SELECT button
on the camera control unit. The * mark
appears beside the selected AE AREA in the
menu. When the button is pressed while the
menu is not displayed, the selected AE
window is displayed on the monitor screen
for about a second.
MULTI: Divides the screen into 9 sections
and adjusts auto exposure according to the
luminance level in each section. Normally
set to this position.
LARGE, MID, SPOT and SLIT:
Displays the following AE windows and
adjusts auto exposure according to the
luminance level in each area. If the object
you are shooting is very small, you can see
it brighter with this setting to SPOT.
MANUAL: Sets the AE window manually
with the desired size and position on the
screen. Follow the steps below.
1 Select MANUAL and press the ENTER
button.
Cross cursor
Set Top-Left Point
Move Cross Cursor
Cancel
Next
MENU
ENTER
2 Move the cross cursor appearing at the
left top corner with the B, b, V or v
button to set the upper and left side size,
then press the ENTER button.
Set Bottom-Right Point
Move Cross Cursor
Cancel
Next
MENU
ENTER
EXPOSURE Menu
LARGE
MID
SLIT
SPOT
Back
BARS
Cross cursor
19
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dxc-c33p

Table des Matières