Stiebel Eltron HSBC 200 Utilisation Et Installation page 36

INSTALLATIoN
Preparations
f Release the 4 screws on the tabs at the front of the appliance. f
f Pull the upper section of the appliance towards the front. f
1 Recessed grip
f Tip the upper section of the appliance backwards. For a f
better hold during transport, use the recessed grips on the
underside and rear of the appliance.
36 | HSBC
319204_HSBC_200_de_en_fr_nl_it.indb 36
f Place the upper section of the appliance on a base to prevent f
damage.
Joining appliance sections
Rejoin the appliance sections in reverse order.
The positioning aids and the dotted line marking provide assis-
tance when positioning and inserting the upper appliance section
into the guide groove on the lower section:
1
1 Recessed grip
2 Guide pin
3 Dotted line (perforation in the panel)
4 Guide groove
5 Positioning aid
1
2
3
4
5
www.stiebel-eltron.com
17.10.2017 10:35:18