Windows Action Center; Calling Adaptec Maxview Storage Manager; Sources For Installation Of The Operating System - Siemens SIMATIC IPC647D Instructions De Service

Masquer les pouces Voir aussi pour SIMATIC IPC647D:
Table des Matières

Publicité

9.3

Windows Action Center

Supplement to section 4.5 of the operating instructions.
Take note of the special information pertaining to Windows 10 and Windows Server 2016 for
the following functions.
Functions
● Automatic updates:
Using automatic updates, Windows routinely searches for the latest critical updates for
the device and installs them automatically.
– You can enable or disable this option for Windows 10 during commissioning of
– This option is enabled in the delivery state for Windows Server 2016.
● User Account Control:
User Account Control issues a warning when programs attempt to modify important
Windows settings. You can then either acknowledge this warning or prevent the program
from changing the Windows settings. This option is enabled in the delivery state for
Windows 10 and Windows Server 2016.
9.4

Calling Adaptec maxView Storage Manager

When Adaptec maxView Storage Manager is called for the first time, Internet Explorer
opens.
Depending on the operating system, the following message is displayed:
● Windows 7 32-bit/64-bit, Windows Server 2008 R2, Windows Server 2012 R2, Windows
Server 2016:
"There is a problem with this website's security certificate".
● Windows Server 2008 R2, Windows Server 2012 R2, Windows Server 2016:
"Content from the website listed below is being blocked by the Internet Explorer
Enhanced Security Configuration.
https://127.0.0.1".
9.5

Sources for installation of the operating system

Supplement to section 7.6.1 of the operating instructions.
If the operating system is faulty, you can reinstall it with the Restore DVD:
The Restore DVD is included in the scope of delivery if you have ordered a device with
operating system. The DVD contains an image file with the following software:
● Operating system with installed hardware drivers
● Monitoring software, e.g. DiagBase
SIMATIC IPC647D
Instructions de service, 03/2018, A5E32996307-AC
Windows.
IMPORTANT: Updated information for IPC647D
9.3 Windows Action Center
249

Publicité

Table des Matières
loading

Table des Matières