Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7
Use
7.1
Starting up the unit
•
Release the compensator lock, push slide
outwards (see figure to the right).
•
Set up the unit according to the intended
use. Ensure the levelling range of 3° is
not exceeded.
•
When you have finished using the unit,
lock the compensator (see figure to the
right).
7.2
Self-levelling function
The CrossLiner 3 is self-levelling. If the unit
is placed in a slanted position of up to 3° in
any direction, the laser beams are plumb
and horizontal.
If the 3° range is exceeded or if the compen-
sator is locked, the projected laser line and
the corresponding LED display flash every
second.
7.3
Operation
Danger!
Never look into the laser beam!
Never direct the laser beam at people or animals!
Start up the CrossLiner 3 (see chapter 7.1)
•
Switch horizontal beam (H) (see chapter 3.1 Function) on / off using "H" button.
•
Switch vertical beams (V
For details of their functions, see chapter 4.2 Control panel.
CrossLiner 3 Operating Instructions
and V
) (see chapter 3.1 Function) on / off using "IV" button.
1
2
14
Compensator
lock released
EN
Compensator
locked
Publicité
Chapitres
Table des Matières
