Siemens EQ.500 integral Manuel D'utilisation page 30

en Troubleshooting
13 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
Appliance no longer
responds.
Appliance only dis-
penses water, not cof-
fee.
Appliance is not dis-
pensing milk froth.
No milk intake by the
milk system.
30
Cause and troubleshooting
Appliance has a fault.
Pull out the mains plug and wait 60 seconds.
1.
Re-insert the mains plug.
2.
Empty bean container is not detected by the appli-
ance.
Pour in coffee beans.
▶
Coffee shaft on brewing unit is blocked.
Clean the brewing unit.
▶
Beans are too oily and are not falling into the grinder.
Gently tap the bean container.
▶
Change the coffee variety.
▶
▶ Do not use oily beans.
▶ Clean the empty bean container with a damp cloth.
Brewing unit is not inserted properly.
▶ Slide the brewing unit right back.
Milk system is soiled.
▶ Clean the milk system in the dishwasher.
Milk tube not immersed in milk.
▶ Use more milk.
▶ Check whether the milk tube is immersed in the
milk.
Heavy build-up of limescale in the appliance.
Descale the appliance.
▶
The milk system is assembled incorrectly.
Assemble the milk system correctly.
▶