Siemens EQ.500 integral Manuel D'utilisation page 24

en Basic settings
10.1 Activating and deactivat-
ing the cup heater
WARNING
Risk of burns!
1
The cup heater
hot.
▶
Never touch the cup heater
hot.
11 Basic settings
You can configure the basic settings for your appliance to meet your needs
and call up additional functions.
11.1 Overview of the basic settings
Setting
Cleaning and care
1
Cup warmer
Water filter
Coffee temp.
Languages
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)
1
Depending on the appliance specifications
24
1
can become very
1
while
Selection
Milk system
Descale
Clean
calc'nClean
Cup warmer off
Cup warmer on
New filter
No filter
normal
high
max.
See options on the appli-
ance.
▶
Allow the hot cup heater
down before touching it.
Tip: Place the cups with their base
on the cup heater to warm them to
1
optimum effect
▶ You can activate or deactivate the
1
cup heater in the basic settings.
Description
Start service programme.
→ "Service pro-
grammes", Page 28
2
Switch cup heater on or
off.
→ "Cup heater", Page 23
Set use of the water fil-
ter.
Set the temperature for
coffee drinks.
Note: The setting is ef-
fective for all preparation
types.
Set menu language.
Changes are immedi-
ately displayed.
1
to cool
.