Cleaning And Care Information - Leckey MyWay Mode D'emploi

p.38 MyWay User Manual
12.0 Cleaning and
Care Information
Harness
• The harness can be
machine washed at
40°C on a gentle program.
1) Lie the harness out flat,
with coloured buckles
facing upwards.
2) If the groin straps are
connected to the black
buckles, release the
straps and connect them
into the grey buckles-
ensure this is done on
both sides.
3) Fold the stripe belt strap
back so it is fastened onto
the Velcro, underneath
the groin strap.
Warning – It is
recommended that the
harness is stored flat
when not in use.
4) Fold the harness inwards,
so the coloured inside is
visible, and fasten
the Velcro.
5) Place the harness inside
the washbag provided,
pull the drawstring ties
to close and tie them
in a bow.
• Do not tumble dry.
• Most stains can be
removed using a clean
microfibre cloth and
lukewarm water. This
method of cleaning is
more effective than a
standard cloth, water
and proprietary soap.
Microfibre consists of very
fine threads of polyester and
nylon that combine to form a
single thread. One microfibre
is 100 times thinner than
a single strand of human
hair. Microfibres are so small
that they attach themselves
to even the smallest, most
microscopic dirt particles
– ones that normal cloths
crudely brush past. For these
reasons dirt and dust are
hoovered up by microfibre
cloths. This is cleaning
naturally without chemicals.
Microfibre cloths must
always be clean as the dirt
can stay locked inside the
cloths fibres.
Washing in hot water will
release any dirt particles
being held.