Cleaning & Care Information - Leckey Horizon Mode D'emploi

Always use caution when making this
adjustment, as fingers could become
trapped in the slot while positioning.
Always use caution when inserting the
tray to make sure the child's hands or
arms do not become trapped.
Do not place hot objects on the tray,
not greater than 40 degrees Celsius.
Please note that the tray is for the use
of the user only. Do not lean or place
heavy objects on the tray, not greater
than 8kgs (17.6lbs).
Never use the tray to steer or push
the stander.
10.9 Sandals
To position the user's feet in the sandals,
secure the Velcro straps provided so the
foot is held in place. The straps should
be placed over the bridge of the foot and
over the toes. The front strap can be fed
through one of two slots on either side of
the sandals, depending on the size of the
user's feet (2).
If the child is wearing sandals or light
footwear, check the straps to make sure
the webbing does not irritate the skin.
1
2
11 Cleaning & Care
Information
How to Maintain
1. It is advisable to charge the battery
for at least one hour everyday. However
if the powered actuator is not operating
and you have checked that the handset is
connected correctly you should stop using
the product immediately and contact your
local dealer.
2. At least once a week, check that all
fixings and fastenings including the castors
are in good condition.
3. The Leckey Horizon Stander is
manufactured from nylon coated metal,
ABS plastic and plywood. When cleaning
the frame we would recommend that you
use warm water and a non-abrasive
detergent.
4. When any parts of or accessories are not
in use, we would advise that you store then
together in a safe place for future use.
5. If you are in any doubt as to the safe
use of your Leckey Horizon Stander please
cease from using the product and contact
your local dealer as soon as possible.
Upholstery and fabrics
1. Clean and care for your fabric on
a regular basis and it will maintain its
condition and appearance.
2. Simply vacuum to remove dust particles
and wipe with a damp cloth for general
cleaning.
3. Microfibre cloths are extremely effective
without soap, which is helpful as soap can
clog your fabric.
4. Remove spillages promptly with an
absorbent dry cloth such as above.
5. Take care not to cause abrasive damage.
6. For heavier soiling use a mild propietary
cleaner and warm water ensuring that
cleaning products aare fully removed.
7. Body fluids should be removed promptly
with cold water and then cleaned as above.
8. Water and oil based stains may be
removed by using most water based
household propietary spray cleaning
agents, following instructions carefully.
9. For extreme soiling and infection control,
use a 5% sodium hypochlorite (bleach)
solution, using clean warm water to ensure
excess products is removed.
10. Removable parts can be machine
washed at 40° – Line drying is
recommended.
11. Gentle Low Heat tumble dry is required.
Metal and plastic and wooden
components
1. Soap and water or antibacterial spray
can be used for daily cleaning.
2. For deep cleaning a low pressure steam
cleaner can be used.
3. Do not use solvents to clean plastic
wooden or metal components.
4. Make sure the product is dry before use.
5. Check all wooden components regularly
to ensure there are no cracks or splitters.