Annual Product Inspection - Leckey MyWay Mode D'emploi

p.40 MyWay User Manual

14.0 Annual Product Inspection

Technicians, VIDA Product
Specialists, Dealers
Leckey recommend that
each product should
be subject to a detailed
inspection at least once
a year and every time the
product is reissued for use.
This inspection should be
carried out by a technically
competent person who has
been trained in the use of
the product and should
include the following checks
as a minimum requirement.
1. Check the upper support
unit securely attaches
to the frame (for Sizes 2
and 3 only).
2. Lift the frame to check
each castor individually.
Make sure they are
moving freely and remove
any dirt from the castors.
Check that the brakes
lock the castors securely.
Check direction lock,
anti-roll back and
resistance features are
all working correctly.
3. Check prone angle, fine
height, overall height
and shoulder height
adjustments are adjusting
freely and locking
securely where applicable.
4. Check the pulley straps
for signs of wear and tear.
5. Check the harness
connection point straps
and buckles for signs
of wear and tear.
6. Check the user's harness
and all straps/buckles for
signs of wear and tear.
7. Check the harness
Velcro strip and brush
off any fluff to ensure
it secures firmly.
8. Check the harness
hoisting points and
hoisting straps for signs
of wear and tear.
9. Check any accessories
attach securely.
10. Check for loose parts/
screws/fittings.
11. Visually check the
structure of the
product ensuring there
are no signs of fatigue
or cracking around
the welds.
12. Visually check the
plastic parts of the
product ensuring there
are no signs of fatigue
or cracking.
13. Leckey recommend
that a written record is
maintained of all annual
product inspections.
Warning – If in any doubt
to the continued safe use
of your Leckey product or if
any parts should fail, please
cease using the product and
contact our Customer Care
team or your local dealer
as soon as possible.