Publicité
Les langues disponibles
Les langues disponibles
4) Install the mounting brackets to the left and right side
of the winch mount. Fasten using M8 bolts, nuts, and
washers. Securely tighten all hardware. See torque
specification chart on page 2.
5) Attach Roller Fairlead to Fairlead Mounting Bracket using
two M10 carriage bolts and lock nuts.
6) Attach fairlead assembly to winch mounting bracket using
three M10 flange bolts and lock nuts.
©2014 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
5
Figure 4
Figure 5
Figure 6
93923A1
Publicité
