Warn 101260 Instructions D'installation page 4

1) Remove the four M8 bolts and nuts from brush guard.
2) Replace the bolts removed in Step 1 with the M8 bolts and
washers provided in this kit.
3) Place winch mount in place by lining up with the M8 bolts
inserted in step 2. Secure winch mount bracket using M8
flange nuts.
©2014 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
4
Figure 1
Figure 2
Figure 3
93923A1