Publicité
Les langues disponibles
Les langues disponibles
User Manual
Keypad G84-4700
USB version
Congratulations!
When you select a quality product from Cherry,
you've always made the right choice. Cherry is a
registered brand of ZF Electronics GmbH.
The keypad offers the following advantages:
•
Cherry ML technology with "Gold Crosspoint"
contacts
•
All keys can be freely programmed via software
•
4 additional keys which can be labeled
individually
•
Suitable for right- and left-handed users
•
Minimal space requirement
When the keypad is connected to the system, the
functions of the labeled keys are available.
Keys can be freely assigned when the Cherry
Tools software has been installed. The
configuration is not saved in the keyboard, but
rather as a file on the PC.
The direct help is a component of the software. It
provides you with information on operation where
you need it. It is called up via F1.
For information on additional products, downloads,
and much more, please visit www.cherry.de or
www.cherrycorp.com
1
Device connection
1.1 Connecting the device to the USB
port
1 Connect the USB plug to any USB connection
on your system. You can also use the USB
connection of a device that is connected to the
system.
2 Follow the instructions on the screen.
1.2 Connecting the keyboard to the PS/2
port
The device also supports connection to the PS/2
port of the PC. A commercially-available USB to
PS/2 adapter is required here (not included in
scope of delivery).
1 Turn off the system.
2 Insert the USB plug of the device into the USB
to PS/2 adapter (not included in scope of
delivery).
3 Connect the PS/2 plug to the corresponding
socket in the system.
4 Turn the system on again.
2
Installation of the software
Cherry Tools
Latest software version on the internet
The software is subject to constant development.
The latest version is available on the Internet
under: http://support.cherry.de
1 Insert your CD in the CD-ROM drive.
The CD-ROM starts automatically.
2 If the CD-ROM does not start automatically,
double click on the CD-ROM drive in
Windows-Explorer and then on the file
autostart.exe.
3 Follow the installation instructions on the screen.
3
Publicité
