Panasonic WV-Q126 Mode D'emploi page 8

7. Secure the mounting chassis to the
ceiling board with the ceiling board
fixing screws (4 positions).
1
Engage the top of the mounting chas-
sis with the 1st anchor bolt.
2
Secure the mounting chassis by turn-
ing the ceiling board fixing screws
clockwise.
Turning the ceiling board fixing screws
clockwise provides ceiling board tight-
ening between the bottom of the
mounting chassis and ceiling board
fixing bracket resulting in mounting
chassis securing.
(Recommended tigtening torque:
0.78 N m {0.58 lbf
•
3
Secure the top of the mounting chas-
sis with double nuts.
Important: When securing this bracket on
the ceiling, make sure that the four ceil-
ing board fixing brackets are open as
shown in the figure.
8. Prepare the cables.
Run the cables from the space of the mounting chassis.
8
ft}
•
1st anchor bolt
Nut
Double nuts
Insert the anchor bolt
Ceiling board
fixing screw
Ceiling
board fixing
bracket
Ceiling board
Turn clockwise