Panasonic WV-Q126 Mode D'emploi page 7

5. Connect the mounting chassis to
another tip of the safety wire.
6. Insert the mounting chassis into the
hole made in Step 1.
* [For those concerned with the direction
of the brand logo]
The direction of the logo on the decora-
tive cover you installed in procedure 14 is
set according to the direction the mount-
ing chassis is inserted. (see the below
illustration)
Direction of the brand logo on
the decorative cover
Safety wire (Accessory)
Ceiling board fixing bracket × 4
3 lines
Use the ceiling board fixing bracket as a guide
Align the brand logo with the ceiling board fix-
ing bracket, which is nearly in the center of the
2 groups of 3 lines.
Mounting chassis
Roof space
Insert the mounting
chassis into the hole
7