Part Description; Hedge Trimmer Safety Warnings; Extended-Reach Hedge Trimmer Safety Warnings; Safety Precautions - Makita EN401MP Instructions D'emploi D'origine

Part description (Fig. 1)
The numbers below refer to the figure
1. Shaft
2. Gear case
3. Blades
4. Angle lock
5. Cutter unit handle
6. Blade cover

Hedge trimmer safety warnings

1. Keep all parts of the body away from the blade. Do not
remove cut material or hold material to be cut when blades
are moving. Blades continue to move after the switch is turned
off. A moment of inattention while operating the hedge trimmer
may result in serious personal injury.
2. Carry the hedge trimmer by the handle with the blade
stopped and taking care not to operate any power switch.
Proper carrying of the hedge trimmer will decrease the risk
of inadvertent starting and resultant personal injury from the
blades.
3. When transporting or storing the hedge trimmer, always
fit the blade cover. Proper handling of the hedge trimmer will
decrease the risk of personal injury from the blades.
4. When clearing jammed material or servicing the unit, make
sure all power switches are off and the battery pack is
removed or disconnected. Unexpected actuation of the hedge
trimmer while clearing jammed material or servicing may result
in serious personal injury.
5. Hold the hedge trimmer by insulated gripping surfaces
only, because the blade may contact hidden wiring. Blades
contacting a "live" wire may make exposed metal parts of the
hedge trimmer "live" and could give the operator an electric
shock.
6. Keep all power cords and cables away from cutting area.
Power cords or cables may be hidden in hedges or bushes and
can be accidentally cut by the blade.
7. Do not use the hedge trimmer in bad weather conditions,
especially when there is a risk of lightning. This decreases
the risk of being struck by lightning.

Extended-reach hedge trimmer safety warnings

1. To reduce the risk of electrocution, never use the extended-
reach hedge trimmer near any electrical power lines. Contact
with or use near power lines may cause serious injury or electric
shock resulting in death.
2. Always use two hands when operating the extended-reach
hedge trimmer. Hold the extended-reach hedge trimmer with
both hands to avoid loss of control.
3. Always use head protection when operating the extended-
reach hedge trimmer overhead. Falling debris can result in
serious personal injury.

Safety precautions

WARNING: Read all safety warnings and all instructions
in this booklet and the instruction manual of the power unit.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "hedge trimmer" and "equipment" in the warnings and
precautions refer to the combination of the attachment and the
power unit.
The term "motor" in the warnings and precautions refers to the
engine or electric motor of the power unit.
Intended use
• This attachment is designed for only the purpose of trimming
shrubs and hedges in conjunction with an approved power unit.
Never use the attachment for the other purpose. Abusing the
attachment may cause serious injury.
General precautions
• Before starting the hedge trimmer, read this booklet and the
instruction manual of the power unit to become familiar with the
handling of the hedge trimmer.
• Do not lend the attachment to a person with insufficient
experience or knowledge regarding handling of hedge trimmers.
• When lending the attachment, always attach this instruction
manual.
• Do not allow children or young persons under 18 years old to use
the hedge trimmer. Keep them away from the hedge trimmer.
• Handle the hedge trimmer with the utmost care and attention.
• Never use the hedge trimmer after consuming alcohol or drugs,
or if feeling tired or ill.
• Never attempt to modify the attachment.
• Follow the regulations about handling of hedge trimmers in your
country.
Personal protective equipment
• Wear safety helmet, protective goggles and protective gloves to
protect yourself from flying debris or falling objects. (Fig. 2)
• Wear ear protection such as ear muffs to prevent hearing loss.
• Wear proper clothing and shoes for safe operation, such as
a work overall and sturdy, non-slip shoes. Do not wear loose
clothing or jewelry. Loose clothes, jewelry or long hair can be
caught in moving parts.
• When touching blades or adjusting the blade angle, wear
protective gloves. Blades can cut bare hands severely.
Work area safety
• DANGER: Keep the hedge trimmer away from
electric lines and communication cables.
Touching or approaching high-voltage lines with hedge trimmer
can result in death or serious injury. Watch power lines and
electrical fences around the work area before starting operation.
• Operate the hedge trimmer under good visibility and daylight
conditions only. Do not operate the hedge trimmer in darkness or
fog.
• Start and operate the engine only outdoors in a well ventilated
area. Operation in a confined or poorly ventilated area can result
in death due to suffocation or carbon monoxide poisoning.
• During operation, never stand on an unstable or slippery surface
or a steep slope. During the cold season, beware of ice and snow
and always ensure secure footing.
• During operation, keep bystanders or animals at least 15 m away
from the hedge trimmer. Stop the motor as soon as someone
approaches.
• Before operation, examine the work area for wire fences, stones,
or other solid objects. They can damage the blades.
• WARNING: Use of this product can create dust containing
chemicals which may cause respiratory or other illnesses.
Some examples of these chemicals are compounds found in
pesticides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Putting into operation
• Before assembling or adjusting the equipment, switch off the
motor and remove the spark plug cap or the battery cartridge.
• Before assembling the blades or adjusting the cutting angle, wear
protective gloves.
• Before starting the motor, inspect the equipment for damages,
loose screws/nuts or improper assembly. Replace if the blades
are cracked, bent, or damaged. Check all control levers and
switches for easy action. Clean and dry the handles.
• Never attempt to start the motor if the equipment is damaged or
not fully assembled. Otherwise serious injury may result.
• Adjust the shoulder harness and hand grip to suit the operator's
body size.
Starting motor
• Wear the personal protective equipments before starting the motor.
• Start the engine at least 3 meters (10 feet) away from the fueling
spot.
• Before starting the motor, make sure that there is no person or
animal in the work area.
• When starting the engine or inserting a battery cartridge, keep the
blades clear of your body and other object, including the ground.
The blades may move when starting and may cause serious
6