Publicité
Les langues disponibles
Les langues disponibles
Monthly: Empty water separator/filter and fill the oil lubricator with oil. Lubricate all
mechanical parts with a few drops of oil. At the same time inspect jack and extensions
for damage and wear and tear.
Refilling of oil: Demount the housing and unscrew the filling plug on the reservoir. Correct
oil level is to the lower edge of the hole with the jack horizontal and the cylinder completely
lowered.
Quantity of oil: 1,25 l.
Any good hydraulic oil of viscosity ISO VG 15 can be used.
NEVER USE BRAKE FLUID!
Safety Inspection
According to national legislation - minimum once a year though - the jack must be
inspected by a professional: Damages, wear and tear, adjustment of the safety valve,
cylinder and pump for leakages.
Possible faults and how to overcome them
■
The jack does not lift to maximum position.
■
The air motor runs slowly or stops: the air filter (handle drawing, 02 511 00) in the air
connection is blocked and needs cleaning or change.
■
The load is dropping: change valve cores in pump. Please observe that the valve cores
are to be tightened only slightly (torque setting of 10 Nm) - or they might break.
■
The cylinder is leaking (oil comes out of the cylinder or out of the Ø2 hole in the middle
cylinder: Change cylinder seals.
Spare parts
Replace worn or broken parts with genuine jack manufacturer supplied parts only. All major
parts may not be provided after discontinuation of a model.
Destruction
Oil must be drained off and legally disposed of.
Pos.
Art. No.
44 800 00
1
01 000 00
2
02 002 65
3
02 004 99
4
02 084 00
5
02 102 00
6
02 110 00
7
02 305 00
8
02 306 00
9
02 493 00
10
02 510 00
11
02 544 00
12
02 546 00
QTY
1
1
2
1
3
1
4
3
2
1
2
2
Description
Air jack complete
O-ring
Screw
Screw
Screw
Washer
Washer
Screw
Screw
Fitting
Fitting
Support bush
Fitting
Publicité
