Valley Sportsman 008858706 Manuel D'instructions page 4

GEAR MOVEMENT
ASSEMBLY INSTRUCTIONS
PLUNGER ASSEMBLY
Slide the Plunger Seal onto the Plunger
1
Assemble the Pressure Release Valve Kit onto the Plunger.
2
Place the assembled Plunger onto the end of the Plunger Shaft.
3
To assemble the stuffer, attach the handle by sliding it onto either
4
the fast or the slow gear.
Slow Gear Shaft
With the Handle attached, turn
clockwise to raise the Plunger;
counter-clockwise to lower the Plunger
Fast Gear Shaft
With the Handle attached, turn
counter-clockwise to raise the Plunger;
clockwise to lower the Plunger
3