Husqvarna DSS200 Notice D'utilisation page 60

Dear Customer,
Thank you for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. A
purchase of one of our products gives you access to
professional help with repairs and services. If the retailer
who sells your machine is not one of our authorised
dealers, ask him for the address of your nearest service
workshop.
This operator's manual is a valuable document. Make
sure it is always at hand at the work place. By following its
content (using, service, maintenance etc.) the life span
and the second-hand value of the machine can be
extended. If you will sell this machine, make sure that the
buyer will get the operator´s manual.
More than 300 years of innovation
Husqvarna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles
XI ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for
the engineering skills behind the development of some of
the world's leading products in areas such as hunting
weapons, bicycles, motorcycles, domestic appliances,
sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products
for forestry, park maintenance and lawn and garden care,
as well as cutting equipment and diamond tools for the
construction and stone industries.
Owner responsibility
It is the owner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware
of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
National legislation could regulate the use of this
machine. Find out what legislation is applicable in the
place where you work before you start using the machine.
The manufacturer's reservation
Subsequent to publishing this manual Husqvarna may
issue additional information for safe operation of this
product. It is the owner's obligation to keep up with the
safest methods of operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
For customer information and assistance, contact us at
our website: www.husqvarna.com
60 – English
PRESENTATION
Design and features
Values such as high performance, reliability, innovative
technology, advanced technical solutions and
environmental considerations distinguish Husqvarna's
products. Safe operation of this product requires the
operator to read this manual carefully. Ask your dealer or
Husqvarna should you need more information.
Some of the unique features of your product are
described below.
DSS200
• Custom design that allows easy access even in
confined spaces.
• Blade to enable cutting pipes and profiles close to
walls or behind other materials.
• The design of the blade makes it possible to cut
wooden structures but also copper pipes.
• Exchangeable blade for cutting metal. (Not hardened
steel). If one of the blades becomes worn, it can be
replaced separately.
• The jaws can cut material with a thickness of 0 mm to
200 / 7,9 mm/inch.
• Hydraulic rotation 360°
Applications
!
The tool is intended to be mounted on a machine for
carrying out demolition by cutting metal structures.
The tool is only to be used together with the machines
listed below.
DXR310
DXR300
DXR270
DXR250
DXR140*
*Separate adapter plate or adapter sleeves required.
The machine is intended for use in industrial applications
by experienced operators.
WARNING! It is prohibited to use the tool
for lifting, pushing, pulling, hammering
or carrying any kind of material.
DSS200
X
X
X
X
X