Specifications - Sharp CD-BK100W Mode D'emploi

Specifications

CD-BK100W
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
„ General
Power source
Power consumption
Dimensions
Weight
„ Amplifier
Output power
Output terminals
„ CD player
Type
Signal readout
D/A converter
Frequency response
Dynamic range
E-25 ENGLISH
AC 110/127/220/230 - 240 V, 50/60 Hz
37 W
Width: 270 mm (10-5/8")
Height: 300 mm (11-4/5")
Depth: 344 mm (13-1/2")
5.2 kg (11.5 lbs.)
MPO: 32 W (16 W + 16 W) (10 % T.H.D.)
RMS: 20 W (10 W + 10 W) (10 % T.H.D.)
Speakers: 8 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
3-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
„ Tuner
Frequency range FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
„ Cassette deck
Frequency response 50 - 14,000 Hz (Normal tape)
Signal/noise ratio 55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter 0.3 % (WRMS)
„ Speaker
Type 10 cm (4") full-range speaker
Maximum input power 20 W
10 W
Rated input power
Impedance 8 ohms
Dimensions Width: 200 mm (7-9/10")
Height: 300 mm (11-4/5")
Depth: 165 mm (6-1/2")
Weight 2.1 kg (4.6 lbs.)/each