Troubleshooting Tips - GE UNC15 Manuel D'utilisation Et Instructions D'installation

Troubleshooting Tips... Before you call for service
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem
Low capacity
No ice
Time to Clean light is on
Noise
The ice machine is designed for quiet operation but will
make some noise during the ice making cycle.
49-1000436 Rev. 0
Possible Causes
Restricted drain or standing water in
the bin
Electric breaker has been tripped
Water supply is low
Auger motor is not working or is
What to Do
Clean the air cooled condenser fins.
Clean the ice making system.
Check the drain line for kinks
Press the ON/OFF button to turn the
power on.
If the Check Water light is flashing
Red, the water supply is low.
Reset by pressing ON/OFF button. If
this doesn't reset the motor and the
lights continue to flash, call for service.
Clean the ice making system following
directions in the Care and Cleaning
section.
19