Sony VPL-SW636C Guide De Référence Rapide page 68

Using the PC Free Interactive Function
(VPL-SW636C only)
The PC Free Interactive function enables you to draw on the screen with the Interactive Pen
Device with only the projector. The data you draw in the whiteboard mode can be saved in the
projector. In the desktop mode, you can draw with the Interactive Pen Device, using an image
from the external device as a background.
Setting the PC Free Interactive Function
1
Set "Interactive Mode" to "PC Free" in "Interactive".
2
Perform calibration.
Calibration
Auto/Manual (Main)/Manual (Sub): Performs calibration for the PC Free Interactive
function. If you select "Auto", the projector performs the calibration automatically. If you
select "Manual (Main)," the calibration for the main pen will be performed manually. If
you select "Manual (Sub)," the calibration for the sub pen will be performed
manually.
Notes
• Before performing the calibration, the message "Do you wish to start calibration?" will be
displayed. If you select "Yes", the projector performs the calibration.
• If you already have started the Interactive Presentation Utility 2 on the computer, perform the
calibration of Interactive Presentation Utility 2.
• If you display the menu or the warning/caution messages etc., are displayed during the
calibration, calibration will stop. In addition, if you stop operating the calibration for more
than 20 seconds, the manual calibration will also stop.
28
GB
Using the PC Free Interactive Function (VPL-SW636C only)