Sony VPL-SW636C Guide De Référence Rapide page 72

4
Insert the new lamp all the way in until
it is securely in place (1). Tighten the
three screws (2).
Note
The power will not turn on if the lamp is
not secured properly.
5
Close the lamp cover and tighten the
1 screw.
32
GB
Replacing the Lamp
6
Connect the AC power cord to a wall
outlet and turn on the projector.
7
Reset the lamp timer for
the next replacement time.
Select "Lamp Timer Reset" on the
Function menu then press the ENTER
key. When a message appears, select
"Yes" to reset the lamp timer.
Caution
For the customers in the
U.S.A. and Canada
Lamp contains
mercury. Dispose according
to applicable local, state/
province and federal laws.
For additional information,
see www.sony.com/mercury
notification of