Technical Data For The Burnchamber - Jøtul FS 73 Manuel D'installation Et D'utilisation

ENGLISH
Table of contents
Installation manual with technical data
1.0 Relationship to the authorities ............ 38
2.0 Technical data for the burnchamber ... 38
3.0 Safety ..................................................... 40
4.0 Installation ............................................ 41
5.0 Installation completed .......................... 47
6.0 Optional extras ...................................... 47
7.0 Recycling ............................................... 47
Product:
On all our products there is a
Jøtul
Room heater fired by solid fuel
label indicating the serial number
Standard : and year. Write this number in the
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products : place indicated in the installation
Flue gas temperature
:
Nominal heat output :
Efficiency
: instructions.
Operation range :
Fuel type
:
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number
Country Classification Certificate/ Approved by
standard
when contacting your retailer or
Norway Klasse II
SP Sveriges Provnings- och
SP
Sweden OGC Jøtul.
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
38
Serial no.
1.0 Relationship to the
authorities
The Jøtul FS 73 is a freestanding product using the Jøtul I 520
as the burn chamber, and can be positioned against combustible
walls at the distances described in Fig. 1.
The installation of a fireplace must be carried out in
compliance with national laws and regulations. All local
ordinances must also be complied with when products
are installed.
Contact your local building authorities regarding restrictions and
installation requirements.
The product may not be used until it has been inspected and
approved by qualified personnel.
The product has been tested and documented as a
freestanding stove in accordance with EN 13240.
The approval label for the freestanding product comes with the
installation instructions for the surround. Cut off the label and
attach it beneath the top plate of the log store.
2.0 Technical data for the
burnchamber
Material:
Finish:
Type of fuel:
Max. log length:
Smoke outlet:
Flue pipe dimension:
Weight approx.:
Optional extras:
Product dimensions, clearances See Fig. 1
Technical data in accordance with EN 13240
Nominal heat output:
Efficiency:
CO emissions (13% O2):
CO emissions (13% O2):
OGC emissions (13% O2):
Dust emissions (13% O2):
Flue gas temperature:
Flue gas flow rate:
Chimney draught, EN 13229:
Recommended draught
with smoke outlet:
Fuel consumption:
Kindling quantity;
Max. kindling:
Operation:
Intermittent operation means normal use of a fireplace. This
means that to refuel the fire, you add more wood as soon as
the previous load of wood has burned down to embers.
Cast iron
Black paint
Wood
50 cm
Top outlet or 45° rotated
position for rear outlet.
Ø 150 mm
110 kg + 235 kg
Floor plate, Adapter for
outside air connection and Kit
for Ø 80 fresh air intake tube.
7 kW
77%
0.07%
884 mg/Nm3
60 mg/Nm3
14 mg/Nm3
305°C
7.1 g/s
12 Pa
16-18 Pa
2.3 kg/h
nominal 1.7 kg
3.4 kg each time and 3.8 kg/h
Intermittent