Jøtul FS 73 Manuel D'installation Et D'utilisation page 43

4. Glue the log store and base together.
Preparing to install the burnchamber
Fig. 9
B
1. Lift up the steel sides (A) and secure them in place using
the screws provided. Screw the fireproof board in place with
2 screws. Position and secure the side panels (B) using the
4 bolts provided. NB: Check that it is level.
A
B
Fig. 10-a
2. Fit the top plate (A) of the log store into place. It might be
rather a tight fit. To make installation easier, put a screw into
the plate and use this like a handle to pull the plate forward.
The top plate of the log store can be mounted/dismounted
through the opening of the log store.
Fig. 10-b
1. Pull the top plate of the log store into place
ENGLISH
A
43