Jøtul FS 73 Manuel D'installation Et D'utilisation page 46

ENGLISH
the steel sides using the screws provided.
2. Then finish fitting the top outlet with the flue pipe or steel
chimney (see the installation instructions for the steel
chimney).
3. If desired, the side plate to cover the log store may be
assembled with glue. Included plate can be used on right
or left side.
Fig. 18
4. Position the top section. Make sure it is flush with the side
pieces and fireproof board.
5. Secure firmly on each side using the 4 bolts provided.
46
Fig. 19
Fig. 20
A
A
A
6. For the top outlet, make a hole in the top grate for the flue
pipe/steel chimney.
7. Put the top grate in place and bend down the tabs (A).
A
A
A
A
A