Jøtul FS 73 Manuel D'installation Et D'utilisation page 44

ENGLISH
Fig. 11
A
2. Fit the bottom plate (A) to the burn chamber.
Fig. 12
44
3. Check that everything is level.
Positioning the burnchamber
Read the section on preparing the burn chamber for installation
in the Installation and Operating Instructions for the Jøtul I 520.
NB: Read the instructions regarding pulling up or removing the
inner heat shield (A).
Fig. 13
4. Move the air intake (B) connector beneath the burn chamber
(See Fig. 4 in the manual for Jøtul I 520)
Fig. 14 - a
A
B
A