Removing The Fittings - Bosch KDN56 Serie Manuel D'utilisation

en Cleaning and servicing
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
Putting the food into the appliance.
6.
13.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Pull out, life and remove the shelf.
▶
→ Fig.
10
Removing door rack
Lift the door rack and remove it.
▶
→ Fig.
11
Removing the container divider
Lift up and remove the container
▶
divider.
→ Fig.
12
Removing the storage container
Pull out the storage container as
1.
far as it will go.
Lift the storage container at the
2.
front and remove it
→ Fig.
13
Removing the fruit and vegetable
container
Pull out the fruit and vegetable
1.
container as far as it will go.
Lift the fruit and vegetable con-
2.
tainer at the front
⁠ .
→ Fig.
14
22
⁠ .
and remove it
Removing the ice cube maker
Remove and empty the ice cube
1.
tray and the ice storage
container ⁠ .
→ Fig.
15
Press the push-button
2.
the ice cube maker from the
holder and remove the ice cube
maker .
→ Fig.
16
Lift the rear end of the holder and
3.
lower it behind the freezer com-
partment shelf . Remove the
holder towards the front ⁠ .
→ Fig.
17
to release