Troubleshooting - Bosch KDN56 Serie Manuel D'utilisation

Troubleshooting

14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting light up.
The LED lighting does
not work.
Side panels of the ap-
pliance are warm.
A warning tone
sounds and flashes.
The door alarm is
switched on.
A warning tone
sounds, the temperat-
ure display (freezer
compartment) flashes
and flashes red.
The temperature
alarm is switched on.
Cause and troubleshooting
Showroom mode is switched on.
Press and hold
1.
until an audible signal sounds.
After a short time, check whether your appliance is
2.
cooling.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
Not a fault. The side panels contain pipes which heat
up during the cooling process. Units touching the ap-
pliance will not be damaged by the heat.
No action required.
The appliance door is open.
Close the appliance door.
▶
Different causes are possible.
Press
▶
a The alarm is switched off.
Larger quantities of fresh food have been put in.
Do not exceed the max. freezing capacity.
▶
→ "Freezing capacity", Page 19
+
.
Troubleshooting en
for 9–11 seconds
23