Installation - Klarstein Skypillar Mode D'emploi

INSTALLATION

1. Open the packaging and remove the device
2. Open the top cover and pour clean water into the water tank.
Note: Make sure that the water level is between the minimum and maximum mark.
To achieve a better cooling effect, an ice container can be placed in the upper water
tank (Caution: Unplug the appliance from the power outlet before filling the water
tank with water).
3. Make sure that the voltage of the socket used corresponds to the voltage indicated
on the type plate of the machine.
Installing the rollers
Turn the device upside down. Remove the 4 rolls.
Align the pin on the top of the rollers with the
installation holes on the bottom of the machine. Push
the pin of each roller fully into the installation holes
(see illustration).
Remote Control
A CR2025 (3V) button battery is required for the remote control. The use of lithium
batteries is recommended.
EN
15