EINHELL GC-CG 18 Li Instructions D'origine page 16

regarded as unsuitable for use in public facilities,
parks and sports centers, along roadways, or in
agriculture and forestry. The operating instructions
supplied by the manufacturer must be obeyed to
ensure that the tool is used properly.
Warning! This tool must not be used for com-
posting purposes (shredding) as this could
result in injury to persons and damage to
property.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Speed n . ........................................... 1200 min
0
Cutting width of grass shears .................. 100 mm
Cutting length of shrub shears ................ 200 mm
Cutting thickness of shrub shears ............... 8 mm
Sound pressure level L
Sound power level L
WA
Uncertainty K .......................................... 2.09 dB
Vibration max. a ..................................≤ 2.5 m/s
h
Uncertainty K ..........................................1.5 m/s
Weight .....................................................0.66 kg
Sound pressure level
at the operator's ear ............................... 72 dB(A)
Uncertainty K ............................................... 3 dB
Important! The tool is supplied without rechar-
geable batteries and without a charger, and is
allowed to be used only with lithium-ion batteries
from the Power-X-Change series.
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
•
The stated vibration emission levels and sta-
ted noise emission values were measured in
accordance with a set of standardized criteria
and can be used to compare one power tool
Anl_GC_CG_18_Li_SPK13.indb 16 Anl_GC_CG_18_Li_SPK13.indb 16
-1
.................... 63.4 dB(A)
pA
......................... 83.4 dB(A)
2
2
GB
with another.
•
The stated vibration emission levels and sta-
ted noise emission values can also be used
to make an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Limitate il tempo di lavoro!
Al riguardo si devono prendere in considerazione
tutte le fasi del ciclo di esercizio (ad esempio i
periodi in cui l'elettroutensile è disinserito e quelli
in cui è inserito, ma funziona a vuoto).
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Danger!
The electric power tool generates an electro-
magnetic fi eld during operation. Under certain
circumstances this fi eld may actively or passively
impede medical implants. To reduce the risk of
serious or fatal injuries, we recommend persons
with medical implants to consult their doctor and
the manufacturer of the medical implant prior to
using the equipment.
- 16 -
01.06.2022 13:37:21 01.06.2022 13:37:21