Bosch Professional GGS 8 CE Notice Originale page 20

OBJ_BUCH-1269-003.book Page 20 Thursday, December 16, 2010 4:05 PM
20 | English
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Collet chuck
2 Clamping nut
3 Grinder spindle
4 Spindle collar
Noise/Vibration Information
Measured sound values determined according to EN 60745.
GGS ...
Professional
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values (triax vector sum) determined according to
EN 60745:
Surface grinding (with wheel diameter of 25 mm):
Vibrational emission value a
Uncertainty K=
Vibration total values (triax vector sum) determined according to
EN 60745:
Surface grinding (with wheel diameter of 50 mm (max.):
Vibrational emission value a
Uncertainty K=
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
3 609 929 C06 | (16.12.10)
5 On/Off switch
6 Thumbwheel for speed preselection
(GGS 8 CE/GGS 28 CE/GGS 28 LCE)
7 Handle (insulated gripping surface)
8 Open-end spanner on the grinder spindle*
9 Open-end spanner applied to clamping nut*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
h
h
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
28 C 28 LC 8 CE
28 CE 28 LCE
dB(A) 78 77
dB(A) 89 88
dB 3 3
2
m/s 3 6
≤2.5
2
m/s 1.5 1.5 1.5
2
m/s 8 14
≤2.5
2
m/s 1.5 1.5 1.5
Bosch Power Tools
82
93
3