ChefLine IFM7 Notice D'utilisation page 27

The panel consists of a main switch (A), a green start button (B), a timer (C), a red emergency
stop button (D).
The panel permits start-up and stopping of the kneading machine, and regulates functioning and
settings.
Legend:
A = Mainswitch (the 2V versions also allow speed selection)
B = Green start button
C = Timer
D = Red emergency stop button
START-UP PHASE IF ÷ IR ÷ IFM ÷ IRM
Connect the kneading machine to the electrical mains and turn the main switch A to the position
"1". In the 2V versions, rotate the switch to the "1" or "2" position according to the desired speed.
Turn the timer knob C to the desired time from 0 to 30 min.
Press the green button B to start both the tank and the spiral.
COMMAND PANEL DESCRIPTION IF-VS ÷ IR-VS
B
The panel consists of a main switch (A), a green start button (B), a timer (C), a red emergency
stop button (D) and a speed adjustment knob (E).
The panel permits start-up and stopping of the kneading machine, and regulates functioning and
settings.
Legend:
A = Main switch
B = Green start button
C = Timer
D = Red emergency stop button
E = Speed regulator
D A
- 27 -
E C