ChefLine IFM7 Notice D'utilisation page 26

2 INSTALLATION
Installation must be executed by qualified personnel in compliance with local, national and
European regulations.
KNEADING MACHINE LEVELLING
If the machine is unstable due to floor irregularity, adjust the support feet or wheels by inserting
rubber pieces.
EQUIPMENT HOOK-UP
Electrical connection
It is sufficient to connect the power supply cable to the electrical mains power supply.
The electrical outlet must be easy to access, no moving should be necessary.

The electrical connection (plug) must be easily accessible, also following kneading
machine installation.
The distance between the machine and the socket must be adequate to not cause tension in
the power supply cable. In addition, the cable must not be located beneath the machine
support feet or wheel.
!
If the electrical power supply cable is damaged, it must be replaced by the technical
assistance service or by a qualified technician to prevent any risks.
GROUND CONNECTION
DANGER
It is mandatory that the electrical system is equipped with a ground connection
and differential switch that comply with currently enforced laws.
3 KNEADING MACHINE START-UP AND USE
COMMAND PANEL DESCRIPTION IF ÷ IR ÷ IFM ÷ IRM
B
D
- 26 -
A C