FAR RAC 181 Traduction Des Instructions Originales page 21

RAC 181
GB
In case you want to convey the pieces of sheared nails inside a container, pull out the baffle (T) and the relative reduction (S)
from the tool.
Connect the riveter with a pipe ø 10 x 8 (C) by inserting it on the fitting.
CAUTION: the radius of curvature of the pipe must not be less than 300 mm, as shown in (pic. f14).
f13
S
T
f14
21
Revisione - 01 Date 04-2017