Argo POLIFEMO SLIM Instructions D'utilisation page 19

The buttons on the remote control correspond to the functions on the control panel.
On the remote control there is also the button
appliance.
HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)
Open the battery cover on the back of the remote control (press and pull the cover).
Place the battery inside the cover, making sure the polarity is correct. Slot the cover back into position on the remote
control.
Use Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/EC and
modification of Directive 56/2013/UE (supplied with the remote control)
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE
2006/66/EC modifications former Directive 2013/56/UE
Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not be
disposed of together with unsorted waste. It must be must be delivered to appropriate separated waste disposal plants or
to dealers that provide a similar service. Separate waste disposal of batteries prevents potential negative effects on the
environment and human health resulting from inadequate disposal, and also allows the materials from which it is made
to be recovered and recycled in order to achieve significant savings in terms of energy and resources. The separate
disposal obligation is underlined by the crossed-out dustbin symbol appearing on the battery. Illegal disposal of the
product by the user shall result in the application of administrative sanctions as defined by current regulations.
V 01/21
REMOTE CONTROL
that allows the deactivation of the LEDs on the control panel of the
19