Argo POLIFEMO SLIM Instructions D'utilisation page 17

Masquer les pouces Voir aussi pour POLIFEMO SLIM:

Les langues disponibles

ON/OFF BUTTON

Press this button on the control panel to turn the appliance on or off.

After pressing the button, the unit will emit two beeps, and will go into stand-by mode; press the ON / OFF button again

and the unit will operate in Normal mode

ventilation speed: this only when the unit is turned on for the first time. The corresponding LED will light up on the control

panel.

In stand-by mode it is only possible to turn the appliance on or off, all other functions are not operational.

With the unit running, press the ON / OFF button to restore the stand-by mode.

MODE BUTTON

When the unit is turned on it works in Normal mode.

Press this button to select the desired operating mode in the following sequence: Normal -> Natural -> Sleep

Normal Mode: the unit works according to a pre-defined program; the corresponding LED

is It's possible to select the desired fan speed.

Natural Mode: the unit works by alternating periods at low, medium or high speed according to a pre-defined

program and accordingly the selected fan speed; in this mode the corresponding LED on the control panel is

Sleep Mode: the unit works alternating periods at low, medium or high speed according to a pre-defined program and

accordingly the selected fan speed; in this mode, the corresponding LED on the control panel is

High speed and sleeping mode on: The unit operates in Normal wind mode at high ventilation speed for 30 minutes,

then switches to medium ventilation speed for 30 minutes, then continues to operate at low ventilation speed.

Medium speed and sleeping mode on: The unit operates in Normal wind mode at medium ventilation speed for 30

minutes, then continues to operate at low ventilation speed.

Low speed and sleeping mode on: The unit works in Normal wind mode constantly in low ventilation speed.

The corresponding LEDs will light up according to the operational ventilation speed

+ - BUTTONS

With the unit on, press the + or - buttons to select the fan speed and to set the Timer.

In Normal mode, each pressure of the + or - keys corresponds to the interval of 1 to 24 speed steps. For a faster selection,

keep the + or - key pressed. In Natural and Sleep mode, each press of the + or - buttons corresponds to 8 speed steps.

The selected speed or timer is shown on the display.

V 01/21

CONTROL PANEL

, in low ventilation

for 3 seconds, then it will switch to medium

on the control panel