Bosch GHG 18V-50 Professional Notice Originale page 6

6 | English
terminal to another. A short circuit between the battery
terminals may cause burns or a fire.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Only charge the batteries using chargers recommen-
u
ded by the manufacturer. A charger that is suitable for
one type of battery may pose a fire risk when used with a
different battery.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The heat gun is intended for deforming and welding plastic,
removing coats of paint and heating heat shrink plastic
tubes. It is also suitable for soldering and tinning, melting ad-
hesive bonding and thawing water pipes.
The heat gun is only intended for handheld, supervised use.
Do not use the heat gun in potentially explosive areas
u
or in the presence of flammable materials or dusts.
Product Features
The numbering of the product features refers to the repres-
entation of the heat gun on the graphics page.
(1) Nozzle
(2) Heat shield, removable
(3) Power level setting
(4) Unlocking switch
(5) On/off switch
(6) LED worklight
a)
(7) Battery charge indicator
a)
(8) Battery release button
a)
(9) Rechargeable battery
a)
(10) Surface nozzle
a)
(11) Angle nozzle
a)
(12) Reflector nozzle
a)
(13) Reducing nozzle
a)
(14) Heat shrink plastic tube
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 6F6 | (27.08.2021)
Technical Data
Heat gun
Article number
Rated voltage
Max. airflow
Temperature at the nozzle out-
A)
let
Temperature measurement ac-
curacy
Weight according to EPTA-Pro-
cedure 01:2014
Dimensions
(length × width × height)
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended rechargeable
batteries (from 4 Ah)
Recommended chargers
A) At an ambient temperature of 20 °C
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/vibration information
Typically, the A-weighted sound pressure level of the heat
gun is less than 70 dB(A).
Vibration total values a (triax vector sum) and uncertainty K:
h
2 2
a < 2.5 m/s , K = 1.5 m/s .
h
Rechargeable battery
Inserting the Battery
Do not use force to insert the rechargeable battery.
u
The rechargeable battery is designed so that it can only
be inserted into the heat gun in the right position.
Push the charged battery into the battery holder until it
clicks into place.
The lithium-ion battery is protected against deep discharge
by "Electronic Cell Protection (ECP)". A protective circuit
switches the heat gun off when the rechargeable battery is
drained.
Follow the instructions on correct disposal.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
GHG 18V-50
3 601 BA6 5..
V= 18
l/min 175
°C 300/500
±10 %
B)
kg 0.93−2.0
mm 183 × 77 × 209
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools