Publicité
Les langues disponibles
Les langues disponibles
Legal and Emissions Information
This publication is intended to provide information about the CT355 circle track engine and related
components. This manual also describes procedures and modifications that may be useful during the
installation of a CT355 circle track engine. It is not intended to replace the comprehensive service
manuals and parts catalogs which cover Chevrolet engines and components. Rather, it is designed to
provide supplemental information in areas of interest to "do-it-yourself" enthusiasts and mechanics.
This publication pertains to engines and vehicles which are used off the public highways except
where specifically noted otherwise. Federal law restricts the removal of any part of a federally
required emission control system on motor vehicles. Further, many states have enacted laws which
prohibit tampering with or modifying any required emission or noise control system. Vehicles which
are not operated on public highways are generally exempt from most regulations, as are some special
interest and pre-emission vehicles. The reader is strongly urged to check all applicable local and state
laws.
Many of the parts described or listed in this manual are merchandised for off-highway application
only, and are tagged with the "Special Parts Notice" reproduced here:
Special Parts Notice
This part has been specifically designed for Off-Highway application only. Since the installation of
this part may either impair your vehicle's emission control performance or be uncertified undercurrent
Motor Vehicle Safety Standards, it should not be installed in a vehicle used on any street or highway.
Additionally, any such application could adversely affect the warranty coverage of such an on-street
or highway vehicle.
The information contained in this publication is presented without any warranty. All the risk for its
use is entirely assumed by the user. Specific component design, mechanical procedures, and
the qualifications of individual readers are beyond the control of the publisher, and there fore the
publisher disclaims all liability incurred in connection with the use of the information provided in this
publication.
Chevrolet, Chevy, the Chevrolet Bow Tie Emblem, General Motors, and GM are all registered
trademarks of the General Motors Corporation. Chevy is a trademark of the General Motors
Company.
Package Contents:
Item
1
2
Component Information:
Cylinder Heads:
The CT355 engine is equipped with aZZ4 aluminum small-block GM cylinder heads. Chevrolet part
number 12556463. These cylinder heads are equipped with 1.94" intake and 1.50" exhaust valves,
163cc intake ports, and 58cc combustion chambers.
Intake Manifold:
This engine comes with a Chevrolet Performance dual plane intake manifold, Chevrolet part number
10185063. This intake manifold has a dual pattern carburetor mounting pad that accommodates both
standard flange Holley carburetors and spread bore Quadrajet carburetors. This intake manifold also has
provisions for an exhaust gas recirculation (EGR) valve and a hot air choke, but has the block-off plates
installed.
TITLE
CT355 Circle Track Racing Engine (88958603) Specifications
Description
Part Number
Engine Assembly
88960518
Specifications
88960548
Quantity
1
1
88960548
IR 24MR14
PART NO.
2
32
SHEET
OF
Publicité
