Introduction; Scope Of Delivery; Proper Use; Safety Information - Parkside PBK 4 B3 Consignes D'utilisation Et De Sécurité

1. Introduction

MANUFACTURER:
Jinhua City Yongsheng Tools Factory
Luo Dian Industrial District,
Jinhua City, Zhejiang Province,
P.R.China
IMPORTER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope you enjoy using the accessory.
NOTE:
According to the applicable product liability laws, the manu-
facturer of the accessory does not assume liability for damages
to the accessory or damages caused by the accessory that
occurs due to:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised specialists.
• Application other than specified
Please consider:
Read through the complete text in the operating instructions be-
fore assembling and using the accessory.
The operating instructions are intended to help the user to be-
come familiar with the accessory and take advantage of the ap-
plication possibilities in accordance with the recommendations.
The operating instructions contain important information on how
to use the accessory safely, professionally and economically,
how to avoid danger, costly repairs, reduce downtimes and how
to increase reliability and service life of the accessories.
In addition to the safety regulations in the operating instruc-
tions, you have to meet the applicable regulations that apply
for the use of the accessory in your country.
Keep the operating instructions package with the accessory at
all times and store it in a plastic cover to protect it from dirt
and moisture. They must be read and carefully observed by all
operating personnel before starting the work.
In addition to the safety instructions contained in this operating
manual and the specific regulations of your country, the techni-
cal rules generally accepted for the use of accessories of the
same type must be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.

2. Scope of delivery

• 1 pair of safety goggles
• Operating manual
2 GB/IE/NI

3. Proper use

The accessory is allowed to be used only for its prescribed
purpose. Any use beyond this is improper. The user/operator,
not the manufacturer, is responsible for damages or injuries of
any type resulting from this.
An element of the intended use is also the observance of the
safety instructions, as well as the assembly instructions and op-
erating information in the operating manual.
In addition, the applicable accident prevention regulations
must be strictly observed.
Other general occupational health and safety-related rules and
regulations must be observed.
The liability of the manufacturer and resulting damages are ex-
cluded in the event of modifications of the accessory.
Please note that the accessory has not been designed for use
in commercial, trade or industrial applications. Our warranty
will be voided if the accessory is used in commercial, trade or
industrial businesses or for equivalent purposes.
Safety goggles
The safety goggles are designed for eye protection.
The product complies with EN 166, safety class F and optical
grade 1.
The protective glass is clear. Safety class F means that the prod-
uct has high resistance to impacts from small particles with low
energy and a high speed of 45 m/s.
If the lenses and wearing parts do not have the same abbre-
viations S, F, B and A, the entire eye protection device must
be assigned the lower range of use. For extremely sensitive
persons, skin contact with certain materials may cause allergic
reactions under certain circumstances. No spare parts or ac-
cessories are available for these safety goggles. If the safety
goggles are damaged, do not use them any more. If the safety
goggles are worn over prescription glasses, mechanical effects
(e.g. impacts) can be transmitted and thus represent a hazard.
If mechanical protection at extreme temperatures is required,
the eye protection device must bear the additional marking T
(e.g. FT, BT, AT). Otherwise, the eye protection device may only
be used at room temperature to protect against high velocity
particles.

4. Safety information

In these operating instructions, we have used the following sym-
bol to mark sections concerning your safety: m.
m WARNING! Read all safety information and in-
structions.
Save all warnings and instructions for future refer-
ence.
Safety goggles
a) The safety goggles and packaging material are
not toys. Keep them out of the hands of children.
b) Never leave the packaging material unattend-
ed. It could be a danger if children play with it.