Renson CAMARGUE SKYE 2.0 Manuel D'utilisation page 152

Can I still add options after
installation?
With your covering, most of the options
can also be added afterwards.
The following options are possible with
the Camargue Skye: integrated Fix-
screens, glass sliding panels, Loggia
sliding panels, Linius walls, curtains, Up/
Down LED, Colomno LED, Lineo LED,
Heat & Sound beam.
What is calibration?
Depending on the position of the roof for calibration, the following movement
will occur:
1. The roof is not fully extended (blades in vertical position)
∫ The roof slides out completely and the blades close
∫ The blades firmly press on, so that the motors find their end position. This
can produce a crackling sound, which is normal.
∫ The blades rotate back to a vertical position
∫ The roof now executes the previously given command
2. The roof is fully extended (blades in vertical position)
∫ The blades close
∫ The blades firmly press on, so that the motors find their end position. That
can create a cracking sound which is normal.
∫ The blades rotate back to a vertical position
∫ The roof slides a little in and then out again
∫ The roof now executes the previously given command
3. The roof is completely closed (blades in horizontal position)
∫ The blades firmly press on, so that the motors find their end position. That
can create a cracking sound which is normal.
∫ The blades rotate to a vertical position
∫ The roof slides a little in and then out again
∫ The roof now executes the previously given command
152
Loggia Plano sliding panels
Glass sliding panels, Fixscreens, curtains
Linius wall
Loggiawood Privacy sliding panels
I have had a general
power cut. Does this
affect my covering?
After a power cut, nothing will
happen until a command is given
to the Camargue Skye (via (app)
control or through weather in-
fluences).
The covering will calibrate first
before executing the requested
command (see "What is calibra-
tion?").
Should the covering be
technically inspected?
As a manufacturer, we recommend an
annual technical inspection of your instal-
lation by the installer.