Renson CAMARGUE SKYE 2.0 Manuel D'utilisation page 122

Security
The installer can activate automatic se-
curity functions during installation (rain,
frost, snow and wind protection).
RAIN
Closing the roof in case of rain.
This is only possible in combination with
the optional rain sensor.
1 rain sensor needed per roof part.
FROST, SNOW, WIND
The roof will move to a safe position ac-
cording to the current weather condi-
tions.
These functions work based on an online
weather data.
That's why the Skye also must be con-
nected to the internet.
It's very important that the installer also
sets your location (city/town) correctly
during installation.
It's possible that the online weather data
differs from the local weather conditions.
The wind protection based on the online
weather data is only applicable for the
roof.
Wind protection for the vertical screens
is possible with an optional wind sensor.
122