Renson CAMARGUE SKYE 2.0 Manuel D'utilisation page 145

IMPORTANT TO KNOW
∫ Terrace coverings in
environment are exposed to pollutants
(smog, acid rain, etc.), chimney smoke,
cooking smoke and weather in general.
It is only normal that the terrace
covering becomes dirty because of this.
Neither the aluminium structure nor the
aluminium roof are self-cleaning. You
must therefore ensure regular cleaning
and maintenance.
∫ Do not use a barbecue or fondue under
a closed bladed roof. Make sure that
the blades are open so that smoke can
escape easily.
∫ When installed in a sand and dust-
rich environment, it can happen that
the translucency of the fabric may be
reduced by the combination of sand
and wind.
∫ Before cleaning, remove any loose dirt
with a brush or vacuum cleaner.
∫ If the fabric becomes wet in a sudden
storm, you can still roll it up and unroll it
later to dry when the weather is better.
However, avoid having the wet fabric
rolled up for more than three days to
prevent formation of mould and spots.
∫ Crystal screen may only be cleaned with
clean lukewarm water (± 30°C).
∫ Frequently control your product on
twigs, leaves, bird nests, ets. and
remove them.
∫ As the manufacturer, we recommend
having a regular technical inspection by
your installer:
– Annually at public utility building and
at your private home.
– Half-yearly at extreme conditions (e.g.
coastal areas).
an urban ∫ The mains connection should be made
by a qualified electrician in accordance
with applicable standards.
∫ Minor colour variations may occur during
the manufacturing process between the
colour guides and the profiles of the
sunprotection screen. There may also
be minor colour differences between
components and profiles.
∫ The fabric may exhibit slight colour
nuances and imperfections.
∫ Because the fabric is rolled up, it can
form folds or creases.
∫ A colour difference can also occur
between screens that are installed at
different times.
∫ Fabrics that contain crystal windows
can expand, shrink and or show folds
or creases caused by differences in
temperature or fabric tension.
∫ Over time, the colour of the fabric
/ crystal window may fade slightly,
depending on the chosen colour and
design.
∫ Milk stains or blue lines can appear on
crystal windows due to dew or moisture.
These are inherent to the product and
disappear when the screen is dry.
∫ In the case of straight screens, where
the fabric
because of the weight of the bottom
rail or a tensioning system, wrinkles can
form in the fabric depending on the type
of screen.
hangs down vertically
EN
145