Audio-Technica AT-LP7 Manuel De L'utilisateur page 14

Specifications
Turntable specifications
Type
Motor
Drive method
Speeds
Turntable platter
Wow and flutter
Signal-to-noise ratio
Output levels
"PHONO"
"LINE (MM)"
Phono Pre-amp gain (MM)
Phono Pre-amp gain (MC)
Tonearm specifications
Type
Effective length
Overhang
Maximum tracking error angle Less than 2.5°
Stylus pressure adjustment
range
Applicable cartridge weight
range (including headshell)
Cartridge and headshell specifications
Cartridge Model
Cartridge Type
Recommended load
impedance
Output voltage
Stylus
Cantilever
Tracking force range
Cartridge weight
Headshell model
Headshell weight
Headshell overhang
adjustment
13
Belt-drive manual turntable
DC motor
Belt drive
33-1/3 RPM, 45 RPM
POM (polyoxymethylene)
< 0.08 % WRMS (33 RPM) at 3 kHz
> 60 dB
4.5 mV nominal at 1 kHz, 5 cm/sec
280 mV nominal at 1 kHz, 5 cm/sec
36 dB nominal, RIAA equalized
56 dB nominal, RIAA equalized
Static balanced J-shaped tonearm
247 mm
17 mm
0 to 2.5 g
15 to 20 g
VM520EB
VM Dual Magnet
47,000 ohms
4.5 mV (mV at 1 kHz, 5 cm/sec)
0.3 × 0.7 mil bonded elliptical stylus
Aluminum pipe
1.8 to 2.2 g (standard 2.0 g)
6.4 g
AT-HS10
10 g (excluding lead wires)
± 5 mm
General specifications
Power supply requirements
Power consumption
AC Adapter
Dimensions
Weight
Accessories included
Replacement stylus (sold
separately)
Replacement headshell (sold
separately)
Replacement belt (sold
separately)
Specifications are subject to change without notice due to
improvements.
100 to 240 V, 50/60 Hz, 0.6 A Max.
5.5 W
12 V, 2 A
450 mm (17.72") × 352 mm (13.86")
× 157 mm (6.18")
(W × D × H)
8.3 kg (18.30 lbs) (without dust
cover)
Dust cover, Platter, Drive belt,
Counterweight, Headshell (AT-HS10)
with VM stereo cartridge (VM520EB),
45-RPM adapter, RCA audio cable
(Approx. 1.4 m (4.6')), AC adapter
(Approx. 1.3 m (4.3')) (AD-SE1220KZ)
VMN20EB
AT-HS10
AT-LP7 exclusive belt