Safety Instructions - Lamona LAM1803 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety instructions

Installation
WARNING! Only a qualified person must install this appliance.
WARNING! Risk of injury or damage to the appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Keep the minimum distance from other appliances and units.
• Always take care when moving the appliance as it is heavy. Always use safety gloves
and enclosed footwear.
• Seal the cut surfaces with a sealant to prevent moisture from causing swelling.
• Protect the bottom of the appliance from steam and moisture.
• Do not install the appliance next to a door or under a window. This prevents hot
cookware from falling from the appliance when the door or the window is opened.
• If the appliance is installed above drawers make sure that the space, between the
bottom of the appliance and the upper drawer is sufficient for air circulation.
• The bottom of the appliance can get hot. Make sure to install a separation panel made
from plywood, kitchen carcass material or other non-flammable materials under the
appliance to prevent access to the bottom.
• The separation panel has to cover the area under the hob completely.
• Make sure that the ventilation space of 2 mm, between the worktop and the front of the
below unit, is free. The warranty does not cover damages caused by the lack of an
adequate ventilation space.
Electrical Connection
WARNING! Risk of fire and electric shock.
• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make sure that the appliance is disconnected from the
power supply.
• Make sure that the parameters on the rating plate are compatible with the electrical
ratings of the mains power supply.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains
cable or plug (if applicable) can make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or
hot cookware, when you connect the appliance to the near sockets.
• Do not use multi-plug adapters and extension cables.
6

Publicité

Chapitres

Table des Matières
loading

Table des Matières