Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Daily use

WARNING! Refer to Safety chapters.
Activating and deactivating
Touch
for 1 second to activate or deactivate the hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the hob,
• you spill something or put something on the control panel for more than 10 seconds (a
pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the
object or clean the control panel.
• the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol
automatically after 2 minutes.
• you do not deactivate a cooking zone or change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and the time after which the hob deactivates:
Heat setting
1 - 2
3 - 4
5
6 - 9
Selecting the cooking zone
To select a cooking zone touch the sensor field
display shows the heat setting (
The heat setting
Set the cooking zone.
Touch
to increase the heat setting. Touch
at the same time to deactivate the cooking zone.
PowerBoost
This function makes more power available to the induction cooking zones. The function
can be activated for the induction cooking zone only for a limited period of time. After this
time the induction cooking zone automatically sets back to the highest heat setting.
12
comes on and the cooking zone deactivates
The hob deactivates after
6 hours
5 hours
4 hours
1.5 hour
/
).
to decrease the heat setting. Touch
corresponding to this zone. The
and

Publicité

Chapitres

Table des Matières
loading

Table des Matières