Care And Cleaning; Troubleshooting - Lamona LAM1803 Mode D'emploi

Heat setting

Care and cleaning

WARNING! Refer to Safety chapters.
General information
• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface have no effect on how the hob operates.
• Use a special cleaner suitable for the surface of the hob.
• Use a special scraper for the glass.
Cleaning the hob
• Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise,
the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob
scraper on the glass surface at an acute angle and move the blade on the surface.
• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive
detergent. After cleaning, wipe the hob dry with a soft cloth.
• Remove shiny metallic discoloration: use a solution of water with vinegar and clean
the glass surface with a cloth.

Troubleshooting

WARNING! Refer to Safety chapters.
What to do if...
Problem
You cannot activate or op-
erate the hob.
16
Use to:
Boil large quantities of water. PowerBoost is activated.
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
The fuse is blown.
Time Hints
(min)
Remedy
Check if the hob is correctly
connected to the electrical sup-
ply.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.