Télécharger Imprimer la page

Makita DLM431 Manuel D'instructions page 12

Tondeuse sans fil
Masquer les pouces Voir aussi pour DLM431:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Mowing a long-grass lawn
Do not try to cut long grass all in one go. Instead, mow
the lawn in some steps. Leave a day or two between
mows until the lawn becomes evenly short.
NOTE: Mowing long grass to a short length all in one
Emptying the grass basket
WARNING:
To reduce a risk of accident, reg-
ularly check the grass basket for any damage or
weakened strength. Replace the grass basket if
necessary.
1.
Release the switch lever.
2.
Remove the lock key.
3.
by holding the handle.
Fig.21: 1. Rear guard 2. Handle
4.
MAINTENANCE &
STORAGE
WARNING:
Always be sure that the lock
key and battery cartridge are removed from the
mower before storage or attempting to perform
inspection or maintenance.
WARNING:
Always remove the lock key when
the mower is not in use. Store the lock key in a
safe place out of reach of children.
WARNING:
Wear gloves when performing
inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Maintenance
1.
2.
Clean the mower using only a wet cloth. Do not
spray or pour water on the mower when cleaning.
3.
4.
5.
wear. Damaged or missing parts should be repaired or
replaced.
Storage
WARNING:
When carrying or storing the
mower, do not hold the folded handles but the
front grip of the mower.
Store mower indoors in a cool, dry and locked place.
Don't store the mower and charger in locations where
the temperature may reach or exceed 40 °C (104 °F).
Fig.22: 1. Front grip 2. Rear grip
1.
Loosen the clamping screws and expand the
the mower body.
Fig.23: 1. Clamping screw 2. Lower handle
2.
Loosen the clamping nuts and pivot the upper
handle back while expanding the both sides.
Fig.24: 1. Clamping nut 2. Upper handle
3.
Store the grass basket between the handle and
the mower body.
Fig.25: 1.
NOTE: When putting the mower in the upright posi-
the mower.
Centers, always using Makita replacement parts.
12 ENGLISH
-
-

Publicité

loading