NOTE. The functions described below can only be seen and setted if the "Customer Programming" item is enabled in the machine configuration
menu, which can only be accessed by the installer technician.
Pre-selection
START-UP
The Pre-selection function makes it possible to set up a list with the beverages to be dispensed in sequence. The function is enabled as follows:
1
Access the drop-down menu.
4
After a few moments, when the Pre-selection
function is activated, the touch screen will show
the following screen:
2
Press the technician access icon
5
To disable the function, follow the same
procedure pressing the pre-selection icon
31 EN
3
.
Press the pre-selection icon
After a few moments the function will be disabled
and the touch screen will show the selected
:
mode:
.