Reset Button; Ethernet Connection; Wi-Fi Antennas - Devolo WiFi 5 Repeater 1200 Manuel

17 Introduction

2.1.3Reset button

Factory default settings
To remove the devolo WiFi 5 Repeater 1200 from
your network and successfully restore factory de-
faults for its entire configuration, press the reset
button for 5 seconds using a paper clip or a similar
object.
Keep in mind that all settings that have al-
ready been made will be lost!
1
Wait for the dot LED of the Wi-Fi symbol to
flash orange and then disconnect the device
from the power grid.
The devolo WiFi 5 Repeater 1200 has been
successfully removed from your existing
network.

2.1.4Ethernet connection

Using
devolo WiFi 5 Repeater 1200, you can connect it to
devolo WiFi 5 Repeater 1200
Light-up behaviour of the arches
One Wi-Fi arch is lit up orange
the Ethernet port
Signal strength to the router
The Wi-Fi connection to the router is not optimal.
a stationary terminal device such as a computer or
game console, etc., with a commercially available
network cable.
Connect only one terminal device to the
devolo WiFi 5 Repeater 1200 via network
cable which is not already connected to your
home network via Wi-Fi. Double connec-
tions result in network errors.

2.1.5 Wi-Fi antennas

The internal Wi-Fi antennas are for connecting to
other network devices wirelessly.
of the