Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
0
0
0
0
*
8
9
0
1
#
0
3
2
8
9
#
1
0
1
8
3
2
1
0
2
1
1
2
1
0
3
3
3
2
1
0
4
8
5
5
4
5
2
5
8
0
4
0
5
#
7
0
1
0
#
8
1
1
#
8
3
0
#
*
Example 3: Enable multi-user mode with automatic code recognition
By default, when multi-user mode is enabled, code entries (user/guest codes) need to be
confirmed with the # key (hash key).
You can avoid this by ensuring that all codes have the same number of digits (e.g. programming
5-digit codes for the master code, users and guests).
You can then enable auto-entry mode (automatic code recognition).
When auto-entry mode is enabled, the code lock automatically detects when a code has
been entered. When the correct code is entered, the code lock immediately activates the
corresponding function (when an access code is entered, the code lock activates the relay). You
do not need to confirm each code entry with the # key (hash key).
78
Enter the master code to enable programming mode (the default
master code is "0000"). The yellow LED will stay constant.
Important - if you have programmed another master code, enter
the new code.
8901 # Enables multi-user mode
Important - If single-user mode was previously enabled, all codes
and settings (except the master code) will be deleted!
Programs the master code to "3289"
Programs user code "01" to "8321"
1
#
Programs user code "02" to "11223"
2
3
#
Programs user code "03" to "33221"
2
1
#
Programs user code "04" to "8555"
5
#
Programs the superuser code for the relay to "2580"
#
The relay output will be enabled for 5 seconds when a user code
is entered
The code lock will be locked for 15 minutes after 10 incorrect code
entries
Enables notification tones for the door opener with two short
beeps
Disables notification tones
Exits programming mode, the yellow LED will flash slowly to
indicate that the code lock is in standby mode
Publicité
Chapitres
Table des Matières
